CrystGard™ protection film is probably the most effective way of protecting your vehicles from road damages such as stone chips, debris and scratches. This patented acrylic adhesive paint protection is designed to protect cars, motorcycles, trucks, vans, boats, watercraft and other types of vehicles.

CrystGard™ forms an invisible exterior protection that can be waxed and maintained just like your paint to maintain the original high gloss shine of modern vehicles.






With a high-gloss finish, CrystGard™ would improve the shine of a vehicle's paint simply with its installation onto the vehicle body. While competitor's PPF's could discolour over time, adding unsightly tints to an existing paint job, CrystGard™ is nearly invisible and color-neutral.

Its topcoat is also scratch resistant, and its unique self-healing properties can reset the surface, should it receive any scratches, through environmental heat (e.g. sunlight or engine temperature) or warm water.




Once installed, CrystGard™ invisibly and permanently protects the vehicle from scratches, stone chips and other blemishes caused by everyday use.

CrystGard™ will withstand lubricants, oils, UV rays, and unlike the competition, also contains an anti-corrosion polymer which inhibits rust and mold growth.

CrystGard™ can also be applied on lamp units without affecting light transmission.







Virtually invisible, CrystGard™ does not alter the aesthetics of the vehicle. It retains its high gloss effect while being virtually maintenance free








CrystGard™ is designed to withstand extreme hot or cold temperatures as well as high humidity.


CrystGard™ is constructed with a top coating of self healing super clear coat with high optical clarity, mated with our custom high flex polyurethane material and mounting adhesive.







CrystGard™ exhibits strong adhesion, but it can be removed without any residue.  It is also extremely flexible; it can conform on curve surface with no wrinkle or creep under professional installation.



Tensile Strength ASTM D 882 60 Mpa
Elongation ASTM D 882 760%
Tear Strength ASTM D 1938 10.5 kg
Peel Strength In Heat 168 hours at 70° C 800 N/m
Peel Strength In Humidity 168 hours in 95% RH 800 N/m
Weathering In Heat 168 hours in 70° C No Change
Weathering In Humidity 168 hours in 95% RH No Change
Weathering Corrosion 24 hours in salt spray No Change
Weathering Xenon Arch 1250 KJ/M 2 No Change
Outdoor Exposure 24 hr in 40° C water No Change
Paint Chipping Gravelometer SAE J4000 Pass
Wear Resistance Taber Abrasion No wear through
Shrinkage 30 minutes at 120° C


Base film 8.0 mil
Adhesive 2.0 mil
Release liner 3.0 mil

COPYRIGHT © 2014 Cool N Lite Solar Film Pte Ltd.  All rights reserved